productList.xslt
Tapcon Hex Head OriginalTapcon Hex Head Original
 

< Back to Tapcon Screw Anchor Range

Tapcon Hex Head Original

Drill, Drive, Done - The original masonry fastening system that cuts it's own thread into concrete, brick and block.

Advantages

  • Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications

  • Removable and adjustable

  • Can be installed close to edges

  • Fire resistant

Types of Materials

Concrete, Masonry, Blockwork, Pre-cast hollow concrete beams, Wood

Main Uses

M&E Applications - Suspended ceilings - Timber to Concrete Formwork Battens - Fire protection Insulation systems to masonry

 
 

Tapcon® Hex Head

productList_ajaxProduct.xslt
productList_ajaxProduct.xslt
productList_ajaxProduct.xslt
productList_ajaxProduct.xslt
productList_ajaxProduct.xslt
productList_ajaxProduct.xslt
EUROCODEDESCRIPTION Hole Ø Fix Thick head Type BOX QTY* PRICEQTYBUY NOW
9215016 X 32MM HEX HEAD TAPCON (4H32)5mm0 - 7mm8mm Hex100£9.59
9215026 X 45MM HEX HEAD TAPCON (4H45)5mm5 - 20mm8mm Hex100£10.87
9215036 X 57MM HEX HEAD TAPCON (4H57)5mm17 - 32mm8mm Hex100£12.27
9215046 X 70MM HEX HEAD TAPCON (4H70)5mm30 - 45mm8mm Hex100£13.37
9215056 X 82MM HEX HEAD TAPCON (4H82)5mm42 - 57mm8mm Hex100£14.47
9215066 X 100MM HEX HEAD TAPCON (4H100)5mm60 - 75mm8mm Hex100£16.08
* All prices for box quantities & exclude VAT.

Tapcon® Accessories

Tapcon® Condrive Kit

productList_ajaxProduct.xslt
EUROCODEDESCRIPTIONBOX QTY* PRICEQTYBUY NOW
921159Tapcon Condrive Drill Driver Installation Kit (for 5mm and 6mm tapcon)1£37.18
* All prices for box quantities & exclude VAT.

Tapcon® Accessories

Tapcon® Hex Head

productList_ajaxProduct.xslt
productList_ajaxProduct.xslt
productList_ajaxProduct.xslt
EUROCODEDESCRIPTIONBOX QTY* PRICEQTYBUY NOW
921437Condrive Sleeve for SDS1£11.55
9211626.5mm Torque Controlled Hex Socket for 5mm Ø Tapcon Hex Head1£5.24
9211638mm Torque Controlled Hex Socket for 6mm Ø Tapcon Hex Head1£6.03
* All prices for box quantities & exclude VAT.

Tapcon® Accessories

SDS+ Drill Bits - For use with Condrive Sleeve

productList_ajaxProduct.xslt
productList_ajaxProduct.xslt
EUROCODEDESCRIPTIONBOX QTY* PRICEQTYBUY NOW
921137SDS+ 4 x 180 Tapcon Condrive Bit up to 100mm (3SD180) Size 4mm (For use with: Tapcon Countersunk, Hex Head and Pan 5.5mm)1£12.53
921154SDS+ 5 x 180 Tapcon Condrive Bit up to 100mm (4SD180) Size 5mm (for use with: Tapcon Countersunk, Hex Head and Pan 5.5mm)1£12.53
* All prices for box quantities & exclude VAT.