productList.xslt
Tapcon Countersunk OriginalTapcon Countersunk Original
 

< Back to Tapcon Screw Anchor Range

Tapcon Countersunk Original

Drill, Drive, Done - The original masonry fastening system that cuts it's own thread into concrete, brick and block.

Advantages

  • Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications
  • Removable and adjustable
  • Can be installed close to edges
  • Fire resistant

Types of Materials

Concrete, Masonry, Blockwork, Pre-cast hollow concrete beams, Wood

Main Uses

M&E Applications - Suspended ceilings - Timber to Concrete Formwork Battens - Fire protection Insulation systems to masonry

 
 

Tapcon® Countersunk

productList_ajaxProduct.xslt
productList_ajaxProduct.xslt
productList_ajaxProduct.xslt
productList_ajaxProduct.xslt
productList_ajaxProduct.xslt
productList_ajaxProduct.xslt
productList_ajaxProduct.xslt
EUROCODEDESCRIPTION Hole Ø Fix Thick head Type BOX QTY* PRICEQTYBUY NOW
9215146 X 45MM COUNTERSUNK TAPCON (4F45)5mm5 - 20mmP3100£10.87
9215156 X 57MM COUNTERSUNK TAPCON (4F57)5mm17 - 32mmP3100£12.27
9215166 X 70MM COUNTERSUNK TAPCON (4F70)5mm30 - 45mmP3100£13.37
9215186 X 100MM COUNTERSUNK TAPCON (4F100)5mm60 - 75mmP3100£16.08
9215196 X 125MM COUNTERSUNK TAPCON (4F125)5mm85 - 100mmP3100£33.43
9215085 X 45MM COUNTERSUNK TAPCON (3F45)4mm5 - 20mmP2100£8.33
9215075 X 32MM COUNTERSUNK TAPCON (3F32)4mm0 - 7mmP2100£7.59
* All prices for box quantities & exclude VAT.

Tapcon® Accessories

Tapcon® Condrive Kit

productList_ajaxProduct.xslt
EUROCODEDESCRIPTIONBOX QTY* PRICEQTYBUY NOW
921159Tapcon Condrive Drill Driver Installation Kit (for 5mm and 6mm tapcon)1£37.18
* All prices for box quantities & exclude VAT.

Tapcon® Accessories

Tapcon® Countersunk Head

productList_ajaxProduct.xslt
productList_ajaxProduct.xslt
productList_ajaxProduct.xslt
EUROCODEDESCRIPTIONBOX QTY* PRICEQTYBUY NOW
921437Condrive Sleeve for SDS1£11.55
921098Phillips Nᵒ 2 Drive Bit (5mm Tapcon Countersunk)1£1.81
921099Phillips Nᵒ 3 Drive Bit (6mm Tapcon Countersunk)1£2.00
* All prices for box quantities & exclude VAT.

Tapcon® Accessories

SDS+ Drill Bits - For use with Condrive Sleeve

productList_ajaxProduct.xslt
productList_ajaxProduct.xslt
EUROCODEDESCRIPTIONBOX QTY* PRICEQTYBUY NOW
921137SDS+ 4 x 180 Tapcon Condrive Bit up to 100mm (3SD180) Size 4mm (For use with: Tapcon Countersunk, Hex Head and Pan 5.5mm)1£12.53
921154SDS+ 5 x 180 Tapcon Condrive Bit up to 100mm (4SD180) Size 5mm (for use with: Tapcon Countersunk, Hex Head and Pan 5.5mm)1£12.53
* All prices for box quantities & exclude VAT.