Facade Panel Fixings

productList.xslt

< Back to Facade Panel Fixings

FZP Tergo for Eternit Facade Panels

New fixing method developed between Eternit and Fischer for 2015. FZP Undercut anchor for EQUITONE [linea] and EQUITONE [tectiva] fibre cement cladding panels. 

The only method to invisibly fix for Equitone [linea] and EQUITONE [tectiva] fibre cement façade panels of 8mm in thickness.

Fischer undercut anchors reduce the thickness on many types of facade panels by up to 33%.

The rear mounted installation of the FZP undercut anchor utilises all the panel material, resulting in performance up to three times better than the alternatives. Increased performance means the thickness of the cladding material can be reduced.

Advantages of FZP Tergo for Eternit Fibre Cement Panels

  • Fixings not visible from front of facade
  • Stressfree fixing
  • Large panel sizes possible
  • High load capability
  • Optimised for longlife

For more information please contact us on 01483 898125

 
 
 

Undercut Anchor for HPL/Fibre Cement Panels (FZP -K)

Use with horizontal rail system and panel brackets to achieve an invisible fix from the front of the façade.

productList_ajaxProduct.xslt
productList_ajaxProduct.xslt
EUROCODEDESCRIPTIONBOX QTY* PRICEAMOUNTBUY NOW
532641Tergo 11x6 M6/T/10 PA for Eternit Panels250  
 
532642Tergo 11x6 M6/T/13 PA for Eternit Panels250  
 
* All prices for box quantities & exclude VAT.

Drilling with CNC carbide-cutter for fischer Undercut Anchor Types

FZP-II-M6 / FZP-II-T (Flush-Installation) and FZP-II-SO (Stand-Off-Installation). The cutter is 80 mm long and has a cutting width of 11.2 mm. The shaft diameter is 12(h6) mm and has a Weldon slot according DIN 6535-HB and DIN 1835-B. A chuck according to DIN 6359 can be used to hold the tool.

productList_ajaxProduct.xslt
EUROCODEDESCRIPTIONBOX QTYPRICEAMOUNTBUY NOW
522398FZPB 11T CNC Carbide Cutter1  
 

Hand-Setting Tool Type SGT

Manually operated setting tool to install fischer FZP undercut anchors FZP-II-T for thin panel materials

productList_ajaxProduct.xslt
EUROCODEDESCRIPTIONBOX QTYPRICEAMOUNTBUY NOW
517408Hand-Setting Tool Type SGT1  
 

Technical

     
 
 
  • Products

    Undercut Anchor for HPL/Fibre Cement Panels (FZP -K)

    Use with horizontal rail system and panel brackets to achieve an invisible fix from the front of the façade.

    productList_ajaxProduct.xslt
    productList_ajaxProduct.xslt
    EUROCODEDESCRIPTIONBOX QTY* PRICEAMOUNTBUY NOW
    532641Tergo 11x6 M6/T/10 PA for Eternit Panels250  
     
    532642Tergo 11x6 M6/T/13 PA for Eternit Panels250  
     
    * All prices for box quantities & exclude VAT.
  • Installation Equipment

    Drilling with CNC carbide-cutter for fischer Undercut Anchor Types

    FZP-II-M6 / FZP-II-T (Flush-Installation) and FZP-II-SO (Stand-Off-Installation). The cutter is 80 mm long and has a cutting width of 11.2 mm. The shaft diameter is 12(h6) mm and has a Weldon slot according DIN 6535-HB and DIN 1835-B. A chuck according to DIN 6359 can be used to hold the tool.

    productList_ajaxProduct.xslt
    EUROCODEDESCRIPTIONBOX QTYPRICEAMOUNTBUY NOW
    522398FZPB 11T CNC Carbide Cutter1  
     

    Hand-Setting Tool Type SGT

    Manually operated setting tool to install fischer FZP undercut anchors FZP-II-T for thin panel materials

    productList_ajaxProduct.xslt
    EUROCODEDESCRIPTIONBOX QTYPRICEAMOUNTBUY NOW
    517408Hand-Setting Tool Type SGT1  
     
  • Downloads